verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-20

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X475-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 475mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke475 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$267.23 $288.95Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-20

The AirTAC SAIJ100X475-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 475 mm travel by up to 20 mm. This yields a precise 455-475 mm usable stroke window, allowing you to fine-tune the retract end position at commissioning without adding external stops.

This bore features a 25 mm carbon steel piston rod with an M20x1.5 thread, paired with a G1/2 port for optimal flow. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. If your application requires load-holding without live air pressure, note that this rear adjuster acts only as a travel stop, so you should explore the SAIL or BSAI locking cylinder series instead.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-20 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X475-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke475 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-20

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×475Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-20 Is Used

settings_input_component

Product Size Changeover

Quickly shift the 455-475 mm travel endpoint by up to 20 mm during packaging line format changes without disassembling the cylinder.

precision_manufacturing

Machine Setup Tuning

Fine-tune the retract position during initial commissioning to dial in exact clamping or pressing distances on heavy machinery.

factory

Variable End-Stop Forming

Adapt the stroke end-point dynamically for different material thicknesses in metal forming presses without adding external mechanical stops.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-20 the Right Cylinder?

The adjustable stroke is perfect for product changeovers on a line, letting you shift the end-stop by up to 20 mm instantly rather than swapping out a fixed-stroke SAI cylinder. To match this ISO 15552 cylinder for a replacement, verify the 475 mm stroke, 20 mm adjustment, G1/2 PT port, and your required mounting style.

Because the stroke is 475 mm, the 25 mm rod needs external guidance to prevent excessive side-loading and premature seal wear. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. This unit lacks a magnet, so position sensing requires a separate piston magnet (-S) to utilize CMSE reed or DMSE electronic switches.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-20 FAQ

At its maximum 1.0 MPa pressure, it can deliver up to 801 kgf.

The rear adjuster screw lets you shorten the 475 mm nominal stroke by up to 20 mm, creating a 455-475 mm travel window. It acts as a physical stop to set the end position and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X475-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X475-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.