verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X55-30

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X55-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 55mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke55 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$176.10 $183.60Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X55-30

The AirTAC SAIJ100X55-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 25 to 55 mm, allowing you to dial back the nominal 55 mm stroke by up to 30 mm during commissioning.

This model features a 25 mm carbon steel rod with an M20x1.5 thread, providing high rigidity against side loads. The extruded aluminum barrel includes sensor grooves on both sides, and pneumatic cushioning at both ends handles end-of-stroke deceleration. The rear adjuster acts purely as a mechanical stop to set the end position and does not hold the load without live air pressure.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X55-30 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X55-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke55 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X55-30

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×55Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X55-30 Is Used

precision_manufacturing

Press Fit Tuning

Dial in the exact 25 to 55 mm insertion depth for bearing or bushing press fits during initial machine commissioning without machining custom spacers.

settings_input_component

Changeover Stops

Quickly adjust the retract end-position to accommodate new product sizes on a packaging line, using the 30 mm adjustment window to adapt the stroke on the fly.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X55-30 the Right Cylinder?

When configuring a machine changeover system, choose this adjustable SAIJ over a fixed SAI if you need to fine-tune the retract end-position without adding external stops or swapping cylinders. For load-holding without continuous air pressure, this cylinder is not a lock; you would need to specify a SAIL or BSAI series instead.

To match this ISO 15552 cylinder as a replacement, confirm the 100 mm bore, 55 mm stroke, 30 mm adjustment range, PT tapered port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because this is a non-magnetized model, it does not support position sensing; adding the -S option enables CMSE reed and DMSE electronic switches.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X55-30 FAQ

The maximum thrust is 801 kgf at 1.0 MPa.

The rear adjuster screw acts as a mechanical stop that lets you trim the effective travel back from the 55 mm nominal stroke down to 25 mm. It sets the retract end-position but does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X55-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X55-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.