Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-10
The AirTAC Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-10
The AirTAC SAIJ100X60-10 is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 50-60 mm usable travel window, allowing you to trim the 60 mm nominal stroke by up to 10 mm during commissioning without adding external stops. In the 100 mm bore class, it delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa operating pressure.
This extruded aluminum barrel design includes sensor grooves on both sides for flexible switch mounting. The carbon steel rod with an M20x1.5 thread handles high side loads well, while the adjustable end-stop works alongside the 36 mm air cushions to decelerate the load. Remember that the adjuster is a travel stop, not a lock, so live air is required to hold position.
Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-10 Is Used
Variable End-Stop Tuning
Dial in the exact 50-60 mm travel window during machine commissioning to accommodate varying material thicknesses without swapping cylinders.
Product Size Changeover
Quickly adjust the retract end-position by up to 10 mm on packaging lines handling different carton sizes, ensuring precise registration.
Heavy Assembly Press
Leverage the 3927 N push force at 0.5 MPa to seat heavy components, using the rear stopper to fine-tune the final pressing depth.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-10 the Right Cylinder?
Choose this 100 mm bore if you need heavy thrust around 3927 N at 0.5 MPa, or step down to an 80 mm bore providing 2513 N if your load is lighter. The adjustable stroke is ideal for product changeovers where exact end-position tuning is critical, unlike a fixed SAI cylinder. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 60 mm stroke, 10 mm adjustment range, PT tapered port thread, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since this model lacks a magnet, position sensing requires adding a -S option to use CMSE reed or DMSE electronic sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-10 FAQ
A rear screw stopper lets you shorten the 60 mm nominal stroke by up to 10 mm, creating a 50-60 mm usable travel window. This allows fine-tuning of the end position at commissioning without bolting on external stops.
At 0.5 MPa, it provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.