
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X600-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X600-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 600 mm stroke that can be dialed back by up to 30 mm, giving you a precise 570-600 mm usable travel window for exact end-position tuning at commissioning.
This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch mounting. It features a 25 mm carbon steel piston rod with an M20x1.5 thread, providing robust resistance to side loads, though the extended 600 mm stroke length still necessitates an external guide to prevent rod deflection. The unit is equipped with adjustable air cushions at both ends to decelerate heavy masses smoothly.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X600-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 570 to 600 mm retract position during machine commissioning to accommodate varying material thicknesses without machining custom spacers.
Quickly adjust the stroke end-limit by up to 30 mm when switching production lines to a new product size, minimizing downtime and avoiding cylinder replacement.
Choose this 100 mm bore adjustable-stroke cylinder when your application requires substantial thrust—3927 N at 0.5 MPa—and the ability to fine-tune the retract end-stop without swapping components or adding external stops during product changeover.
The SAIJ100X600-30 uses a G1/2 PT tapered port and supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because it lacks a -S magnet, it does not support CMSE reed or DMSE electronic sensors. Remember that the rear adjuster and air cushions act only as travel stops and deceleration; they do not hold the load without live air. For fail-safe load holding, consider an AirTAC SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external rod lock.
Quick checklist
The rear adjusting screw acts as an external stopper that mechanically limits the piston's travel. For this model, it shortens the effective stroke from the 600 mm nominal length down to a minimum of 570 mm, providing a 30 mm tuning window without changing the cylinder itself.
If operated at 0.7 MPa, the push force increases to 5497 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.