
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X650-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 650mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X650-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 620-650 mm usable travel window, allowing you to trim the 650 mm nominal stroke by up to 30 mm.
It features a G1/2 PT tapered port and a 25 mm carbon steel rod with an M20x1.5 thread. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a travel stop to fine-tune end positions, so live air is still required to hold the load.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X650-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 620-650 mm travel window during line changeovers to accommodate new product lengths without replacing the cylinder.
Adjust the rear stopper to set precise retraction points for heavy product transfer gates on material handling conveyors.
Choose this 100 mm bore when a 63 mm bore (offering 2805 N at 0.9 MPa) is insufficient, but a 125 mm bore is excessive. The 30 mm adjustment range is ideal for product changeovers, letting you dial in the exact end-stop without adding external physical stops or swapping the cylinder.
For a fixed-stroke setup without the rear adjuster, the standard SAI cylinder is the alternative. Because the stroke is 650 mm, an external guide is recommended to prevent excessive side-loading on the 25 mm rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. If you need true load-holding without live air pressure, consider the SAIL or BSAI series instead.
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw lets you shorten the 650 mm nominal stroke by up to 30 mm, creating a 620-650 mm usable travel window. It functions as a mechanical stop for end-position tuning, not a lock, so air pressure must be maintained to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.