
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X70-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 70mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X70-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 70 mm stroke that can be fine-tuned down by up to 40 mm, creating a precise 30-70 mm usable travel window for exact end-position calibration.
This variant includes a carbon steel piston rod and a -S magnet for seamless integration with AirTAC CMSE reed and DMSE electronic sensors via the dual-side barrel grooves. The rear adjuster acts purely as a mechanical stop to set the travel end and relies on the integrated air cushions for deceleration; it does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X70-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 30-70 mm travel window during product size changes to set exact clamping positions without replacing the actuator.
Fine-tune the retracted end-stop during commissioning to compensate for mechanical tolerance stack-up in the fixture.
Choose this 100 mm bore cylinder when you need substantial thrust—stepping down to an 80 mm bore reduces push force to 2513 N at 0.5 MPa. The adjustable stroke is ideal for machine setup and product changeovers, allowing you to dial in the exact end-stop without swapping cylinders or adding external shims. For an ISO 15552 replacement match, specify the 100 mm bore, 70 mm stroke, 40 mm adjustment, PT tapered ports, and the -S magnet.
Because the stroke is 70 mm, side-load risks are minimal, but always ensure the M20x1.5 rod thread is aligned with your load coupling. If your application requires true load-holding without continuous air pressure, the rear stopper here is insufficient; consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder instead.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 801 kgf of push force.
The rear adjusting screw allows you to mechanically shorten the 70 mm nominal stroke by up to 40 mm, providing a usable travel window of 30 to 70 mm. The adjuster acts as a travel stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.