Airtac SAIJ100 Adjustable Cylinder SAIJ100X700-10
The AirTAC Airtac SAIJ100 Adjustable Cylinder SAIJ100X700-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke700 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X700-10
The AirTAC SAIJ100X700-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 690 to 700 mm usable travel window, allowing you to dial back the nominal 700 mm stroke by up to 10 mm during commissioning without adding external stops. It delivers 5497 N of push force at 0.7 MPa.
This model uses a 25 mm carbon steel rod with an M20x1.5 thread, offering high rigidity for heavy loads. It includes variable air cushions at both ends and operates at speeds of 30-800 mm/s. The mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR.
Airtac SAIJ100 Adjustable Cylinder SAIJ100X700-10 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X700-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X700-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X700-10 Is Used
Press Tonnage Setup
Dial in the exact 690 to 700 mm end-stop during heavy press commissioning to accommodate material thickness variations without swapping cylinders.
Diversion Arm Positioning
Fine-tune the retract distance of a heavy sorting arm by up to 10 mm to match new package sizes on a high-speed packaging line.
Long-Stroke Material Handling
Move heavy pallets or chassis components with 5497 N of push force while trimming the travel end to clear fixed machine guards.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X700-10 the Right Cylinder?
Choose this 100 mm bore when a 63 mm bore (2182 N push at 0.5 MPa) is insufficient for your load, but you want to avoid stepping up to a 125 mm cylinder. The 10 mm rear adjuster is ideal for fine-tuning end positions during product changeovers. Because the 700 mm stroke is long, you must use an external guide to prevent excessive side-loading on the rod.
For an ISO 15552 replacement, match the 100 mm bore, 700 mm stroke, 10 mm adjustment, PT tapered port, and standard carbon steel rod. Since no magnet is specified, position sensing requires adding a magnet or external switches. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air, so use a SAIL or BSAI cylinder if load-holding is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100X700-10 FAQ
At 0.7 MPa operating pressure, this 100 mm bore cylinder generates 5497 N of push force and 3681 N of pull force. At the maximum 1.0 MPa pressure, it provides 7068 N of push force.
The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective travel from 700 mm down to 690 mm. It sets the retract end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X700-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.