
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X700-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X700-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in fine-tuning eliminates the need to swap cylinders or bolt on external stops when finalizing end positions.
This variant includes a magnet for CMSE and DMSE sensors and uses a carbon steel rod with an M20x1.5 thread. Because the adjuster and the variable air cushions at both ends only decelerate the travel, they do not hold the load without live air. For position holding without pressure, consider the SAIL or BSAI series. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X700-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the retract end-stop from 700mm down to 680mm when adapting machinery to run a slightly shorter product format.
Dial in the exact end-of-stroke position during machine commissioning without machining external stopper blocks or replacing the cylinder.
The adjustable stroke is ideal for product-size changeovers on a line, letting you set a new retract end-stop without changing the cylinder. To replace an ISO 15552 cylinder, match the 100mm bore, 700mm stroke, 20mm adjustment, PT tapered port, and the -S magnet.
With a 700mm stroke, the M20x1.5 rod is highly susceptible to side-loading. Even though the larger rod handles more bending stress, you must use an external guide to prevent binding and premature seal wear. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
At 0.9 MPa, the push force increases to 7068N.
The rear adjuster screw allows you to shorten the 700mm nominal stroke by up to 20mm, creating a 680-700mm usable travel window. It acts as a mechanical stop to fine-tune the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.