
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X75-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 75mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X75-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 65-75 mm usable travel window, letting you trim the 75 mm nominal stroke by up to 10 mm during commissioning.
This -S variant includes a magnet for CMSE reed and DMSE electronic sensors, fitting neatly into the extruded aluminum barrel's dual sensor grooves. The rear stopper screw sets the retract end position without requiring external stops, though it acts only as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X75-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 65-75 mm end position during press setup to accommodate material thickness variations without changing hardware.
Quickly adjust the retract stop on a packaging line when switching to a different package size, minimizing downtime.
Fine-tune the final resting position of high-force tooling to prevent mechanical interference during commissioning.
The 10 mm adjustment window is ideal for fine-tuning end positions during machine setup or product changeover, avoiding the need to swap a fixed-stroke SAI cylinder. When specifying an ISO 15552 replacement, match the 75 mm stroke, 10 mm adjuster, PT port thread, and -S magnet.
For load-holding without continuous air pressure, note that the SAIJ adjuster and air cushions do not function as a lock; consider an AirTAC SAIL or BSAI cylinder instead. With a 75 mm stroke, side-load risks are minimal, but always ensure the M20x1.5 rod is properly aligned. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw allows you to shorten the 75 mm nominal stroke by up to 10 mm, providing a usable travel window of 65 to 75 mm. It acts as a mechanical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.