verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X75-50S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X75-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 75mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke75 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$181.68 $189.18Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X75-50S

The AirTAC SAIJ100X75-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The built-in rear stopper allows you to trim the 75 mm nominal travel back by up to 50 mm, creating a 25-75 mm usable travel window for precise end-position tuning during commissioning.

This adjustable-stroke model includes a magnet for CMSE and DMSE sensors and uses a carbon steel rod with an M20x1.5 thread. It supports PT tapered ports sized G1/2. The rear adjuster acts purely as a travel stop to set deceleration and end limits, meaning it will not hold a load without live air pressure.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X75-50S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X75-50S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke75 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X75-50S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×75Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X75-50S Is Used

tune

Variable End-Stop Positioning

Dial in the exact retraction point between 25 and 75 mm during machine commissioning to accommodate multiple product sizes without mechanical rebuilds.

settings_input_component

Product Changeover Systems

Quickly adjust the stroke length on the fly using the rear screw, allowing a single cylinder to handle different package heights or material lengths.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X75-50S the Right Cylinder?

The rear adjustment screw lets you fine-tune the 25-75 mm travel window without swapping the cylinder or adding external stops, unlike a fixed-stroke SAI model.

For any application needing 300 mm or more of stroke, you must use an external guide to prevent excessive side-loading, though this 75 mm stroke operates safely within its 30-800 mm/s speed range. If your process requires true load-holding without continuous air pressure, this cylinder is not a lock; consider the SAIL or BSAI series instead. For ISO 15552 replacement matching, verify the 100 mm bore, 75 mm stroke, 50 mm adjustment, G1/2 PT port, and the -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X75-50S FAQ

At 0.9 MPa, the push force increases to 7068 N.

The rear adjusting screw acts as a mechanical stop that lets you shorten the 75 mm nominal stroke by up to 50 mm, providing a usable travel window of 25 to 75 mm for fine-tuning end positions.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X75-50S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X75-50S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.