Airtac SAIJ100 Adjustable Cylinder SAIJ100X900-75
The AirTAC Airtac SAIJ100 Adjustable Cylinder SAIJ100X900-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 900mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke900 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X900-75
The AirTAC SAIJ100X900-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 825-900 mm usable travel window by allowing you to dial back the 900 mm nominal stroke by up to 75 mm. This bore delivers 5497 N of push force at 0.7 MPa and uses a G1/2 port with a 25 mm carbon steel rod.
The external adjuster acts as a travel stop to fine-tune the retract end-position during commissioning without adding external stops. It is not a locking device and will not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ100 Adjustable Cylinder SAIJ100X900-75 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X900-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X900-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X900-75 Is Used
Variable End-Position Setup
Dial in the exact retract distance from 825 to 900 mm during machine commissioning to perfect product spacing without swapping hardware.
Product Changeover Lines
Quickly adapt the stroke window for different package sizes on a conveyor by adjusting the rear stopper screw.
Long-Stroke Clamping
Utilize the 5497 N push force at 0.7 MPa for heavy clamping tasks while retaining the flexibility to trim the travel end.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X900-75 the Right Cylinder?
Choose this 100 mm bore if you need more thrust than the 63 mm option (2182 N at 0.7 MPa) but want to avoid the larger 160 mm footprint. The adjustable stroke is perfect for product changeovers requiring different end-stops, unlike a fixed SAI cylinder. For load-holding without live air, use a SAIL or BSAI cylinder instead. To replace an ISO 15552 cylinder, match the 900 mm stroke, 75 mm adjuster, PT G1/2 port, and mounting. Because the stroke is 900 mm, an external guide is recommended to manage side-load on the 25 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100X900-75 FAQ
At 0.7 MPa operating pressure, this 100 mm bore cylinder provides 5497 N of push force and 3681 N of pull force.
The rear adjuster screw acts as a mechanical stop, letting you shorten the 900 mm stroke by up to 75 mm, yielding an 825-900 mm travel window. It sets the end position but does not lock the load without air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X900-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.