
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X95-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 95mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X95-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 95 mm stroke that can be dialed back by up to 75 mm, yielding a highly flexible 20-95 mm usable travel window.
This model features a carbon steel piston rod with an M20x1.5 thread, engineered to handle greater side loads than smaller bores. The extruded aluminum barrel includes sensor grooves on both sides for straightforward switch integration. It uses a PT tapered port thread and operates at speeds between 30 and 800 mm/s.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X95-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for machining fixtures requiring precise retract positioning across different part lengths, utilizing the 20-95 mm travel window.
Enables rapid product-size changeovers on automated lines by simply turning the rear stopper rather than re-mounting hardware.
Allows operators to dial in the exact end position during commissioning to prevent mechanical crashes without adding external stops.
Select this 100 mm bore actuator when an application demands high thrust combined with variable end-of-stroke positioning, such as accommodating multiple product sizes on a single line without physically swapping cylinders. If your setup requires less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa, whereas moving up to 125 mm provides 6136 N. Because the nominal stroke is under 300 mm, external side-load guides are less critical, though the substantial M20x1.5 rod thread still provides excellent rigidity.
The rear adjuster acts strictly as a mechanical stop to fine-tune the retract distance during commissioning; it does not lock or hold the load without continuous live air pressure. For load-holding requirements without air, consider an AirTAC SAIL or BSAI variant. This unit is dimensionally interchangeable per ISO 15552 and is configured with a PT port, carbon steel rod, and no sensor magnet.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster acts as a mechanical stop that lets you trim the effective stroke back from the 95 mm nominal length. This creates a 20-95 mm usable travel window for fine-tuning the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.