
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X950-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 950mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X950-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides, and the -S magnet enables position detection with AirTAC CMSE reed or DMSE electronic switches.
This model uses a 25mm carbon steel rod with an M20x1.5 thread and PT tapered ports. The rear adjuster acts purely as a mechanical stop to decelerate travel; it does not lock the load. For position holding without live air pressure, an external rod lock or a SAIL pneumatic-lock cylinder is required. Variable air cushions at both ends absorb the kinetic energy of this long-stroke actuator.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 850-950mm travel window during product size transitions without physically replacing the cylinder or adding external stopper blocks.
Set precise retraction limits for automated conveyor diverter arms that must handle packages of varying widths on the same line.
Trim the effective stroke by up to 100mm during machine setup to perfect timing and prevent mechanical crashes before final lock-down.
Choose this 100mm bore actuator when a standard fixed-stroke SAI cylinder cannot accommodate product changeovers or fine end-stop dialing. The 100mm adjustment window lets you dial in the exact retraction distance without swapping hardware. If your application requires less force, stepping down to an 80mm bore yields 2268N of pull force at 0.5 MPa; if you need more power, a 125mm bore provides 5734N. Because the 950mm stroke is substantial, always use an external guide to prevent side-loading damage to the rod and front cap.
When replacing an ISO 15552 cylinder, match the 100mm bore, 950mm stroke, 100mm adjustment, G1/2 port, and -S magnet. This SAIJ model supports the Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting styles, deliberately omitting FB, CA, CB, and CR brackets to streamline the adjustable stopper design.
Quick checklist
At 0.9 MPa, the push force increases to 7068N.
The rear adjuster screw lets you shorten the 950mm nominal stroke by up to 100mm, providing a usable travel window of 850-950mm. It acts as a mechanical stop to set the end position and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.