verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-10S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X950-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 950mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke950 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$418.25 $425.75Save 1% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-10S

The AirTAC SAIJ100X950-10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a 950 mm nominal stroke and a 10 mm adjustment range, it provides a usable travel window of 940 to 950 mm. This built-in stopper allows you to fine-tune the retract end position during commissioning without adding external stops.

Equipped with a magnet for CMSE and DMSE sensors, this carbon-rod cylinder supports end-of-stroke detection. The extruded aluminum barrel includes sensor grooves on both sides. Because the 950 mm stroke is long, an external guide is recommended to manage side loads on the 25 mm rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-10S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X950-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke950 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-10S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×950Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-10S Is Used

precision_manufacturing

Machine Setup Tuning

Dial in the exact retract position within the 940-950 mm window during initial commissioning without swapping hardware.

settings_input_component

Product Changeover

Quickly adjust the end-stop by up to 10 mm to accommodate slight variations in product size on a packaging line.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-10S the Right Cylinder?

Choose this adjustable-stroke model over a fixed SAI when you need precise end-position tuning during machine setup or product changeover. If your application requires less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa. For higher force, a 125 mm bore provides 6136 N.

When ordering a replacement, match the 100 mm bore, 950 mm stroke, 10 mm adjustment, G1/2 PT port, and the -S magnet. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For true load-holding without pressure, consider the SAIL or BSAI series.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-10S FAQ

At 0.7 MPa, the push force increases to 5497 N.

The rear adjuster acts as a mechanical stop that lets you trim the effective stroke back by up to 10 mm. This creates a usable travel window of 940 to 950 mm for fine-tuning the end position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X950-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.