verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-30S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X950-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 950mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke950 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$418.25 $425.75Save 1% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-30S

The AirTAC SAIJ100X950-30-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 920 to 950 mm usable travel window, letting you dial in the retract end-position precisely during commissioning. Equipped with a magnetic piston for position detection, it supports AirTAC CMSE reed and DMSE solid-state sensors via the dual-side barrel grooves.

The PT tapered port ensures a tight pneumatic seal. The rear adjuster acts purely as a travel stop for end-position tuning, not a load-holding lock.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-30S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X950-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke950 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-30S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×950Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-30S Is Used

precision_manufacturing

Variable End-Stop Machining

Fine-tune the 920-950 mm retract position on the fly to accommodate different workpiece lengths without reinstalling the cylinder.

conveyor_belt

Product Changeover Lines

Rapidly adjust the stroke end-position during product size transitions to maintain precise sorting and pushing distances.

settings_input_component

Commissioning Calibration

Dial in the exact end-of-stroke stop during initial machine setup to compensate for mechanical tolerance stack-up.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-30S the Right Cylinder?

Choose this adjustable-stroke model when your machine setup requires variable end-stops or product-size changeovers without physically swapping the cylinder. If you need less force, the 80 mm bore neighbor provides 2513 N at 0.5 MPa; stepping up to 125 mm yields 6136 N. Because the 950 mm stroke is long and unsupported, an external guide rail is strongly recommended to prevent rod side-loading and premature wear.

For ISO 15552 interchangeability, match the 100 mm bore, 950 mm stroke, 30 mm adjustment, PT port, and -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. If your application requires true load-holding without live air pressure, select the SAIL or BSAI series instead of relying on this rear stopper.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-30S FAQ

At 0.9 MPa, the push force increases to 7068 N.

The rear adjuster screw lets you shorten the 950 mm nominal stroke by up to 30 mm, giving a 920 to 950 mm travel window. It functions as a mechanical stop for position tuning, not a load-holding lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X950-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.