
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X950-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 950mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X950-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 950 mm nominal stroke that can be dialed back by up to 50 mm, yielding a usable travel window of 900 to 950 mm for exact end-position tuning during commissioning.
The rear adjuster acts purely as a mechanical stop to set the retraction end position; it does not lock or hold the load without live air pressure. For load-holding without continuous air, an external rod lock or related types like the SAIL or BSAI are required. This model features PT tapered port threads (G1/2), dual-side sensor grooves for CMSE reed or DMSE electronic sensors (requires a magnet), and variable air cushions at both ends.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop from 900 to 950 mm during production line changeovers to accommodate varying material lengths without swapping the cylinder.
Fine-tune the retract position at machine setup to perfect tool alignment, using the 50 mm adjustment window instead of machining custom spacers.
Choose this 100 mm bore cylinder when an application requires heavy thrust (3927 N at 0.5 MPa) and precise variable end-stops without adding external stopper blocks. If you need less force, stepping down to an 80 mm bore provides 2513 N at 0.5 MPa; stepping up to 125 mm yields 6136 N. An adjustable stroke is ideal for machine setups requiring product-size changeovers, whereas a fixed-stroke SAI cylinder suits dedicated single-purpose lines.
Because the stroke is 950 mm, an external guide is strongly recommended to prevent excessive side-loading on the 25 mm rod. To match this ISO 15552 replacement exactly, specify: 100 mm bore, 950 mm stroke, 50 mm adjustment, PT port threads, and the required mounting from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2 — note that FB, CA, CB, and CR are omitted).
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjusting screw lets you shorten the 950 mm nominal stroke by up to 50 mm, giving an effective travel range of 900 to 950 mm. The adjuster acts as a travel stop and does not hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.