
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X950-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 950mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Its 950mm nominal stroke can be dialed back by up to 75mm, creating an 875-950mm usable travel window for exact end-position tuning during commissioning. This cylinder features a robust 25mm carbon steel rod and a G1/2 PT port.
Because the adjuster acts purely as a mechanical stop and does not lock the load, live air is required to maintain position. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. It supports a standard speed range of 30-800mm/s and uses the SAIJ mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 875-950mm travel window during format changes on packaging lines, avoiding the need to physically swap out long-stroke cylinders.
Fine-tune the exact retract position of heavy 100mm bore actuators during machine commissioning to prevent mechanical crashes at the end of travel.
Adjust the physical stop position on demand for varying pallet sizes without installing secondary external stopper hardware.
The adjustable stroke is ideal for product changeovers on a line, allowing you to shift the end-stop without swapping the cylinder or adding external stops. For any stroke of 950mm, the 25mm rod handles significant loads, but an external guide is strongly recommended to prevent side-loading damage.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 950mm stroke, 75mm adjustment, G1/2 port, and required mounting. It omits FB, CA, CB, and CR mounts. If your process requires holding a load without continuous air pressure, look instead to the SAIL or BSAI locking cylinder lines.
Quick checklist
If you increase the operating pressure to 0.7MPa, the push force rises to 5497N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from 950mm down to as little as 875mm. Note that this stopper only sets the travel end; it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.