
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X950-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 950mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X950-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster.
This unit includes a standard carbon steel rod and a -S magnet for position sensing. It supports AirTAC CMSE reed and DMSE electronic sensors, and its extruded aluminum barrel features sensor grooves on both sides for flexible mounting. The SAIJ mounting set omits FB, CA, CB, and CR brackets, utilizing Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X950-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 875-950 mm travel window during production line changeovers to accommodate different package sizes without replacing the cylinder.
Dial in the exact retract position during machine commissioning using the 75 mm rear adjuster, avoiding the need for external mechanical stops.
An adjustable stroke is preferred over a fixed SAI when you need variable end-stops for product changeovers without swapping the cylinder. Because the stroke is 950 mm, an external guide is highly recommended to prevent side-load damage to the rod and front cap.
To match this configuration: 100 mm bore, 950 mm stroke, 75 mm adjustment, PT tapered ports, carbon steel rod, and a -S magnet. The rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-air holding, use an SAIL lock, BSAI clamp-lock, or external rod lock.
Quick checklist
The rear adjuster lets you shorten the 950 mm nominal stroke by up to 75 mm, creating an 875 to 950 mm usable travel window for fine-tuning end positions at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.