Airtac SAIJ125 Adjustable Cylinder SAIJ125X105-100
The AirTAC SAIJ125 Adjustable Cylinder SAIJ125X105-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø125mm bore and 105mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ125 mm
- Stroke105 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ125 Adjustable Cylinder SAIJ125X105-100
The AirTAC SAIJ125X105-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This wide adjustment band allows operators to fine-tune end positions directly at the machine without swapping hardware.
Built with a standard carbon steel piston rod and a PT tapered port thread, this extruded aluminum barrel design excludes tie-rods. It supports a speed range of 30-500mm/s and uses adjustable air cushions at both ends to decelerate the load. The rear stopper screw sets the retract limit but does not lock the load without live air pressure.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X105-100 Technical Specifications
| Model | Airtac SAIJ125 Adjustable Cylinder SAIJ125X105-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | — |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ125 Adjustable Cylinder SAIJ125X105-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 125 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ125 Adjustable Cylinder SAIJ125X105-100 Is Used
Variable End-Stop Tuning
Dial in the exact retract distance from 5 to 105mm during machine commissioning to perfect material positioning without machining new stop blocks.
Heavy Assembly Pressing
Leverage the 125mm bore thrust for light pressing duties while retaining the ability to tweak the bottoming position on the fly.
Is the Airtac SAIJ125 Adjustable Cylinder SAIJ125X105-100 the Right Cylinder?
If you need less force, stepping down to an 80mm bore yields 2513N; if you need more, a 160mm bore provides 10053N. The 5-105mm adjustable window is perfect for prototyping or product changeovers, replacing the need for multiple fixed-stroke SAI cylinders. To match this ISO 15552 footprint, specify the 125mm bore, 105mm stroke, 100mm adjustment, PT port, and no magnet. Mounting choices are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke exceeds 300mm? No, but the massive 100mm adjustment on a short barrel means you must ensure the external guide can handle the variable overhang. For load-holding without air, use an external rod lock or choose a SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X105-100 FAQ
At 0.7 MPa, the push force increases to 8590N.
The rear adjuster acts as a mechanical stop, allowing you to trim the 105mm nominal stroke back by up to 100mm. This creates a 5-105mm usable travel window for fine-tuning end positions, though it does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ125 Adjustable Cylinder SAIJ125X105-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.