Airtac SAIJ125 Adjustable Cylinder SAIJ125X130-20S
The AirTAC SAIJ125 Adjustable Cylinder SAIJ125X130-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø125mm bore and 130mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ125 mm
- Stroke130 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ125 Adjustable Cylinder SAIJ125X130-20S
The AirTAC SAIJ125X130-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in magnet enables position sensing with CMSE reed and DMSE electronic solid-state switches mounted in the dual-side sensor grooves.
This specific SKU features a 130mm nominal stroke paired with a 20mm adjustment mechanism, creating a usable travel window of 110-130mm. You can fine-tune the retract end-position at commissioning without swapping the barrel or adding external stops. The extruded aluminum profile body uses a PT tapered port thread, and the adjustable stopper serves purely as a travel end-limit, not a load-holding lock.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X130-20S Technical Specifications
| Model | Airtac SAIJ125 Adjustable Cylinder SAIJ125X130-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | — |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ125 Adjustable Cylinder SAIJ125X130-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 125 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ125 Adjustable Cylinder SAIJ125X130-20S Is Used
Product Size Changeovers
Quickly dial the end-of-stroke position back by up to 20mm when a production line switches to a different package size, avoiding physical cylinder replacement.
Machine Commissioning
Fine-tune the 110-130mm travel window during initial setup to perfect mechanical timing without machining custom external stopper blocks.
Is the Airtac SAIJ125 Adjustable Cylinder SAIJ125X130-20S the Right Cylinder?
Choose this adjustable-stroke SAIJ over a fixed SAI when you need precise end-stop tuning during machine setup or product-size changeovers. It uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. For exact ISO 15552 replacement matching, verify the 125mm bore, 130mm stroke, 20mm adjustment, PT port, and -S magnet. If your process requires holding a load without live air pressure, note that this rear adjuster is only a stop; you must use a SAIL pneumatic lock, BSAI clamp-lock, or external rod lock instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X130-20S FAQ
A rear stopper screw lets you shorten the 130mm nominal stroke by up to 20mm, yielding a usable 110-130mm travel window. It acts only as a travel end-limit and does not hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ125 Adjustable Cylinder SAIJ125X130-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.