Airtac SAIJ125 Adjustable Cylinder SAIJ125X185-10
The AirTAC SAIJ125 Adjustable Cylinder SAIJ125X185-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø125mm bore and 185mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ125 mm
- Stroke185 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ125 Adjustable Cylinder SAIJ125X185-10
It features a carbon steel rod and a PT tapered port thread. By turning the rear screw, you achieve a 175-185mm usable travel window for precise end-position tuning without adding external stops.
This adjustable-stroke design excels during machine commissioning or product changeovers. The rear mechanism acts purely as a travel stop and does not hold the load without live air; for dead-air holding, consider the SAIL or BSAI variants. You can mount CMSE or DMSE sensors in the dual-side barrel grooves if a magnet is specified separately.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X185-10 Technical Specifications
| Model | Airtac SAIJ125 Adjustable Cylinder SAIJ125X185-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | — |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ125 Adjustable Cylinder SAIJ125X185-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 125 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ125 Adjustable Cylinder SAIJ125X185-10 Is Used
Machine Changeover
Dial in the 175-185mm travel window during product size changes to set exact retract endpoints without swapping hardware.
Assembly Line Tuning
Adjust the stroke by up to 10mm on the fly to synchronize large actuators across an automated assembly line.
Is the Airtac SAIJ125 Adjustable Cylinder SAIJ125X185-10 the Right Cylinder?
The 10mm adjustment window is ideal for dialing in exact endpoints during setup. For load-holding without air pressure, use an external rod lock or pilot-operated check valve, as the adjuster is not a brake.
To match this exact ISO 15552 replacement, specify: 125mm bore, 185mm stroke, 10mm adjustment, PT port thread, carbon steel rod, and no magnet. The mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 185mm stroke is relatively short for this large bore, side-load risks are minimal, but external guiding remains recommended for optimal cylinder longevity.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X185-10 FAQ
At 0.7 MPa, the push force increases to 8590N.
The rear adjuster screw allows you to shorten the 185mm nominal stroke by up to 10mm, creating a 175-185mm usable travel window. It functions as a mechanical stop for end-position tuning and is not a locking device.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ125 Adjustable Cylinder SAIJ125X185-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.