Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-20S
The AirTAC SAIJ125 Adjustable Cylinder SAIJ125X210-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø125mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ125 mm
- Stroke210 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-20S
The AirTAC SAIJ125X210-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 210 mm travel by up to 20 mm. This creates a usable 190-210 mm end-position window, enabling precise fine-tuning at commissioning without swapping the unit or adding external stops.
This -S variant includes a magnet for position sensing and is built with a standard carbon steel rod with an M27x2 thread. The extruded aluminum barrel features sensor grooves on both sides, directly supporting AirTAC CMSE reed and DMSE solid-state switches. Operating at 30-500 mm/s, it uses a PT tapered port and includes adjustable air cushions at both ends to manage deceleration.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-20S Technical Specifications
| Model | Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | — |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 125 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-20S Is Used
Product Changeover
Dial in the 190-210 mm travel window during line changeovers to accommodate slightly different package lengths without replacing the cylinder.
End-Stop Tuning
Fine-tune the exact retracted position during machine commissioning using the rear screw, avoiding the need to bolt on custom external spacers.
Is the Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-20S the Right Cylinder?
The rear adjuster acts purely as a mechanical stop to set the travel end and does not hold the load without live air; for true load-holding without pressure, consider an SAIL pneumatic lock or BSAI clamp-lock cylinder.
As a dimensionally interchangeable ISO 15552 profile cylinder, it matches standard mounting footprints. The SAIJ series uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Ensure your setup specifies the 125 mm bore, 210 mm nominal stroke, 20 mm adjustment, PT port, and -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-20S FAQ
The rear adjuster screw lets you shorten the 210 mm nominal stroke by up to 20 mm, creating a 190-210 mm usable travel window. The adjuster functions as a travel stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.