Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-50
The AirTAC SAIJ125 Adjustable Cylinder SAIJ125X210-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø125mm bore and 210mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ125 mm
- Stroke210 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-50
The AirTAC SAIJ125X210-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 160 to 210 mm, letting you dial back the nominal 210 mm stroke by up to 50 mm during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches if a magnet is added later. It uses a PT tapered port and a 32 mm carbon steel rod. The rear adjuster acts purely as a travel stop for end-position tuning and does not lock the load without live air pressure.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-50 Technical Specifications
| Model | Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | — |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 125 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-50 Is Used
Variable End-Stop Setup
Fine-tune the retraction point anywhere between 160 and 210 mm during machine commissioning to achieve perfect positioning without adding external stopper blocks.
Product Changeover
Quickly adapt the stroke length on automated lines when processing different material sizes, using the 50 mm adjustment range to bypass mechanical rework.
Is the Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-50 the Right Cylinder?
An adjustable stroke is selected over a fixed SAI cylinder when a machine requires fine end-position tuning or frequent product-size changeovers without swapping hardware. For load-holding without continuous air, use an external rod lock or pilot-operated check valve, as the rear adjuster only sets the travel end.
To match this ISO 15552 interchangeable cylinder, specify a 125 mm bore, 210 mm stroke, 50 mm adjustment range, PT port thread, and standard carbon steel rod. Because the total stroke is 210 mm, ensure an external guide supports any heavy loads to prevent side-load wear on the rod and seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-50 FAQ
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from 210 mm down to a minimum of 160 mm. This provides a 50 mm tuning window for precise end-position setup without altering the cylinder mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ125 Adjustable Cylinder SAIJ125X210-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.