Airtac SAIJ125 Adjustable Cylinder SAIJ125X65-40S
The AirTAC SAIJ125 Adjustable Cylinder SAIJ125X65-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø125mm bore and 65mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ125 mm
- Stroke65 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ125 Adjustable Cylinder SAIJ125X65-40S
The AirTAC SAIJ125X65-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 25 to 65 mm for exact end-position tuning. This unit includes a magnet for CMSE reed and DMSE electronic sensors.
The integrated rear stopper allows you to dial in the stroke during commissioning without adding external stops or swapping the cylinder. It features a 32 mm carbon steel rod with an M27x2 thread, designed to handle significant side loads. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting options cover Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X65-40S Technical Specifications
| Model | Airtac SAIJ125 Adjustable Cylinder SAIJ125X65-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | — |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ125 Adjustable Cylinder SAIJ125X65-40S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 125 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ125 Adjustable Cylinder SAIJ125X65-40S Is Used
Heavy-Duty End-Stop Tuning
Dial in the exact clamping distance on large fixtures by trimming the stroke within the 25-65 mm window during machine commissioning.
Product Size Changeovers
Quickly adapt a heavy conveyor diverter arm to accommodate different package lengths without physically replacing the pneumatic cylinder.
Is the Airtac SAIJ125 Adjustable Cylinder SAIJ125X65-40S the Right Cylinder?
The 40 mm adjustment range is perfect for product changeovers on a line, letting you vary the end-stop on the fly instead of relying on a fixed-stroke SAI cylinder. Remember that the rear adjuster functions strictly as a travel stop and does not hold the load without live air; for true load-holding, consider an external rod lock, a pilot-operated check valve, or the SAIL/BSAI series.
When replacing an ISO 15552 cylinder, verify the 125 mm bore, 65 mm nominal stroke, 40 mm adjustment range, PT tapered port threads, and the -S magnet requirement. Ensure your mounting choice falls within the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2), as FB, CA, CB, and CR configurations are not supported.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X65-40S FAQ
If you increase the operating pressure to 0.9 MPa, the push force reaches 11045 N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the 65 mm nominal stroke down to as little as 25 mm. It only sets the end position and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ125 Adjustable Cylinder SAIJ125X65-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.