Airtac SAIJ125 Adjustable Cylinder SAIJ125X650-100S
The AirTAC SAIJ125 Adjustable Cylinder SAIJ125X650-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø125mm bore and 650mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ125 mm
- Stroke650 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ125 Adjustable Cylinder SAIJ125X650-100S
The AirTAC SAIJ125X650-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to fine-tune the retract end position during commissioning without swapping out the cylinder or adding external stops.
This model includes a magnet for position sensing and is designed with an extruded aluminum barrel housing sensor grooves on both sides. It accommodates AirTAC CMSE reed and DMSE electronic solid-state switches. The 32 mm carbon steel piston rod and M27x2 rod thread provide robust resistance against side loads, though a 650 mm stroke still requires an external guide to prevent rod bending under heavy lateral forces.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X650-100S Technical Specifications
| Model | Airtac SAIJ125 Adjustable Cylinder SAIJ125X650-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 5734 N | 5734 N |
| 0.7 MPa | 8027 N | — |
| Max (@1.0 MPa) | 1169 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ125 Adjustable Cylinder SAIJ125X650-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 125 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ125 Adjustable Cylinder SAIJ125X650-100S Is Used
Variable End-Stop Positioning
Dial in the exact retract distance within the 550-650 mm window during machine commissioning to accommodate different material lengths without external stopper blocks.
Product Line Changeover
Quickly adjust the end-of-stroke position on packaging or handling lines when switching between product sizes, minimizing downtime between production runs.
Is the Airtac SAIJ125 Adjustable Cylinder SAIJ125X650-100S the Right Cylinder?
The adjustable stroke is ideal for product-size changeovers on a line, whereas a fixed-stroke SAI cylinder is better for repetitive single-cycle tasks.
When replacing an ISO 15552 cylinder, match the 125 mm bore, 650 mm stroke, 100 mm adjustment range, PT tapered port threads, and the -S magnet option. Note that the rear adjuster acts strictly as a travel stop and does not hold the load without live air; for true load-holding without pneumatic pressure, consider an AirTAC SAIL locking cylinder or a BSAI clamp-lock model. Furthermore, this SAIJ variant supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ125 Adjustable Cylinder SAIJ125X650-100S FAQ
At 0.7 MPa, the push force increases to 8590 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from the nominal 650 mm down to 550 mm. It only sets the travel end and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ125 Adjustable Cylinder SAIJ125X650-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.