Airtac SAIJ200 Adjustable Cylinder SAIJ200X250-100S
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X250-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 250mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke250 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X250-100S
The AirTAC SAIJ200X250-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability eliminates the need to swap cylinders or bolt on external stops during machine commissioning or product changeovers.
As an extruded aluminum profile cylinder, it integrates sensor grooves on both sides compatible with CMSE reed and DMSE electronic switches. The 40mm carbon steel rod and M36x2 thread provide high structural rigidity, while the rear adjuster functions strictly as a travel stop to set deceleration limits, not as a lock to hold loads without live air pressure.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X250-100S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X250-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X250-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X250-100S Is Used
Heavy Press Tuning
Fine-tune the exact bottoming position of a heavy forming or press operation within the 150-250mm window without changing out the entire cylinder.
Multi-Size Tooling
Rapidly adapt automated machinery for different product lengths by dialing the rear stopper back up to 100mm during production line changeovers.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X250-100S the Right Cylinder?
The 100mm adjustment range is ideal for machinery requiring variable end-stops across different product sizes, whereas a fixed-stroke SAI cylinder is better suited for dedicated, single-task stations. For operations needing true load-holding without continuous air pressure, consider the SAIL or BSAI series instead of relying on this stopper.
When replacing an ISO 15552 cylinder, match the 200mm bore, 250mm nominal stroke, 100mm adjuster, PT tapered port thread, and the -S magnet option. Because the 250mm stroke is relatively short for this massive bore, side-load concerns are manageable, but an external guide is still recommended for heavy offset loads. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X250-100S FAQ
At the maximum rated pressure of 1.0 MPa, it can deliver up to 3204 kgf.
The rear adjuster screw allows you to shorten the effective travel from the 250mm nominal stroke by up to 100mm, creating a usable travel window of 150-250mm. This stopper sets the end position and deceleration point but does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X250-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.