Airtac SAIJ200 Adjustable Cylinder SAIJ200X260-10
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X260-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 260mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke260 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X260-10
The AirTAC SAIJ200X260-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 250-260 mm, allowing you to dial back the 260 mm nominal stroke by up to 10 mm during commissioning.
This heavy-duty actuator utilizes a robust 40 mm carbon steel rod with an M36x2 thread, providing high structural integrity against side loads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. A PT tapered port ensures a tight, leak-free pneumatic connection at this high flow rate.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X260-10 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X260-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X260-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X260-10 Is Used
Heavy Press Tuning
Fine-tune the 250-260 mm travel window on a large stamping press to accommodate varying material thicknesses without repositioning the entire actuator assembly.
Large Assembly Jigs
Dial in the exact end-stop for massive clamping fixtures, using the 10 mm adjustment to compensate for mechanical wear or tooling differences on the production line.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X260-10 the Right Cylinder?
Select this 200 mm bore actuator when an application requires immense thrust—stepping down to a 160 mm bore drops the 0.5 MPa push force to 10053 N. The adjustable 10 mm rear stopper is ideal for fine-tuning the end position without swapping components or adding external stops. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets.
When matching an ISO 15552 replacement, verify the 260 mm stroke, 10 mm adjustment range, PT port, and standard carbon steel rod. For the 260 mm stroke, an external guide is recommended to manage side loads. Note that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For load-holding without pressure, consider an external rod lock or the AirTAC BSAI clamp-lock series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X260-10 FAQ
At 0.7 MPa, the push force increases to 21991 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 260 mm nominal stroke by up to 10 mm, creating a 250-260 mm usable travel window. It is a travel stop, not a lock, and requires live air to hold position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X260-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.