Airtac SAIJ200 Adjustable Cylinder SAIJ200X275-10
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X275-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 275mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke275 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X275-10
The AirTAC SAIJ200X275-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It delivers massive thrust, pushing 15708 N at 0.5 MPa and up to 28274 N at 0.9 MPa. The integrated rear screw allows you to trim the 275 mm nominal stroke back by 10 mm, creating a precise 265-275 mm usable travel window for final positioning at commissioning.
This 200 mm bore actuator uses a robust 40 mm carbon steel rod with an M36x2 thread and G3/4 PT ports. It features variable air cushions at both ends to absorb heavy kinetic energy. The adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X275-10 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X275-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X275-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X275-10 Is Used
Heavy Pressing Operations
Dial in the exact 265-275 mm end-position to ensure consistent, high-force contact during heavy assembly or forming tasks.
Product Changeover
Quickly adjust the travel end-stop by up to 10 mm to accommodate slightly different product sizes on the same production line.
Large Machine Setup
Fine-tune the rear stopper during commissioning of large machinery to perfect the stroke length without swapping actuators.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X275-10 the Right Cylinder?
Select this 200 mm bore model when an application demands exceptionally high force—stepping down to a 160 mm bore drops the 0.5 MPa push force to 10053 N. Choose this adjustable-stroke SAIJ over a fixed SAI when you need to dial in a precise 265-275 mm end-stop during machine setup or product changeover without adding external physical stops. For load holding without continuous air pressure, use an SAIL or BSAI cylinder instead.
When ordering, confirm the 200 mm bore, 275 mm stroke, 10 mm adjustment, G3/4 PT ports, and standard carbon steel rod. Because the stroke is 275 mm, ensure an external guide supports the load to prevent excessive side-loading on the 40 mm rod. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X275-10 FAQ
A rear adjuster screw shortens the 275 mm nominal stroke by up to 10 mm, giving a 265-275 mm travel window. This stopper sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X275-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.