Airtac SAIJ200 Adjustable Cylinder SAIJ200X290-100S
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200X290-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 290mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke290 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X290-100S
The AirTAC SAIJ200X290-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering massive thrust up to 15708 N at 0.5 MPa. It features a carbon steel piston rod and a built-in magnet for position sensing. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
With a nominal 290 mm stroke and a 100 mm adjustment range, this SKU provides a usable travel window of 190 to 290 mm. This allows you to dial in the exact end-position at commissioning without adding external stops. The rear adjuster acts purely as a travel stop to set deceleration, not as a lock, so it will not hold the load without live air pressure.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X290-100S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X290-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X290-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X290-100S Is Used
Heavy Press Tuning
Fine-tune the press end position during machine setup to accommodate different material thicknesses without changing the cylinder.
Product Diverter Changeover
Adjust the retract stop on the fly to handle varying package sizes moving down a high-force transfer line.
Variable End-Stop Setup
Dial in the exact travel window from 190 to 290 mm during commissioning to perfect the timing of a heavy assembly station.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X290-100S the Right Cylinder?
Choose this 200 mm bore when your application requires extreme force, stepping up from the 160 mm bore which provides 10053 N push force at 0.5 MPa. The adjustable stroke is ideal for product changeovers on a line, letting you fine-tune the end stop on the fly instead of physically swapping cylinders. For a fixed end position, the standard SAI cylinder is sufficient.
This configuration uses PT tapered port threads (G3/4), a basic mounting setup (Basic, FA, LB, TC, FTC, TCM1, TCM2), and a -S magnet for CMSE reed or DMSE electronic sensors. Because the stroke is 290 mm, ensure proper external guidance to prevent side-load damage to the rod and seals. For load-holding without live air, consider the SAIL or BSAI series instead of relying on the adjuster.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X290-100S FAQ
At 0.5 MPa operating pressure, this 200 mm bore cylinder provides 15708 N of push force and 15080 N of pull force. It can reach a maximum thrust of 3204 kgf at 1.0 MPa.
The rear adjuster allows you to shorten the effective travel from the 290 mm nominal stroke down to 190 mm. This provides a 190-290 mm adjustable window for fine-tuning the end position at commissioning without needing external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X290-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.