Airtac SAIJ200 Adjustable Cylinder SAIJ200X35-10
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X35-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 35mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke35 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X35-10
The AirTAC SAIJ200X35-10 is a double-acting ISO 15552 profile cylinder engineered for heavy-duty applications requiring exact end-position tuning. A rear mechanical stopper allows you to trim the nominal 35 mm stroke back by up to 10 mm, creating a precise 25-35 mm usable travel window for commissioning without external shims.
This massive 200 mm bore variant features a robust 40 mm carbon steel rod with an M36x2 thread, built to withstand high side-loading forces, though an external guide remains essential for optimal longevity. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE electronic switches, while PT tapered port threads ensure a rigid pneumatic connection.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X35-10 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X35-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X35-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X35-10 Is Used
Heavy Press Tuning
Fine-tune the 25-35 mm travel window during heavy press commissioning to achieve exact material contact without adding external mechanical shims.
Product Changeover
Quickly adjust the end-stop position on automated lines when switching between heavy product variants, using the rear screw to adapt the stroke on the fly.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X35-10 the Right Cylinder?
Choose this 200 mm bore model when your process demands extreme force—stepping down to a 160 mm bore drops the 0.5 MPa push force to 10053 N. The 10 mm rear adjuster is selected when you need micro-adjustments to dial in a specific end-stop during machine setup, avoiding the need to physically swap out a fixed-stroke SAI cylinder. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe load holding, consider an SAIL or BSAI cylinder. As a dimensionally interchangeable ISO 15552 cylinder, it matches the 200 mm bore, 35 mm stroke, 10 mm adjustment, PT port, and standard carbon steel rod specifications.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X35-10 FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 3204 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from 35 mm down to 25 mm. It decelerates the travel end but does not lock the load; live air is required to hold position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X35-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.