Airtac SAIJ200 Adjustable Cylinder SAIJ200X375-10S
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X375-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 375mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke375 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X375-10S
The AirTAC SAIJ200X375-10-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, built for heavy-duty positioning. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting.
Equipped with a standard carbon steel rod and a -S magnet, this unit supports AirTAC CMSE reed and DMSE electronic solid-state sensors for precise end-of-stroke detection. The PT tapered G3/4 port handles high flow requirements, while the rear adjuster acts purely as a travel stop to fine-tune the retract position without adding external stops.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X375-10S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X375-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X375-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X375-10S Is Used
Heavy Press Positioning
Fine-tune the 365-375 mm stroke window during heavy press changeovers to ensure precise bottom-dead-center alignment without swapping actuators.
Industrial Machine Setup
Dial in the exact end position during initial commissioning using the rear 10 mm adjuster, avoiding the need to bolt on custom external mechanical stops.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X375-10S the Right Cylinder?
The adjustable stroke is ideal for product changeovers where exact end-stop positioning varies slightly.
When replacing an ISO 15552 cylinder, match the 200 mm bore, 375 mm stroke, 10 mm adjustment range, G3/4 PT port, and -S magnet configuration. Because the stroke is 375 mm, an external guide is recommended to prevent excessive side-loading on the rod. Remember that the rear adjuster only sets the travel end and does not hold the load without live air; for true fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X375-10S FAQ
The rear adjusting screw acts as a mechanical stopper that allows you to shorten the effective stroke by up to 10 mm, creating a 365-375 mm usable travel window. It only sets the end position and does not lock the load; live air pressure is still required to hold the load in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X375-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.