Airtac SAIJ200 Adjustable Cylinder SAIJ200X425-10
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X425-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 425mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke425 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X425-10
The AirTAC SAIJ200X425-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It delivers immense thrust, pushing with 15708 N and pulling with 15080 N at 0.5 MPa. The integrated adjuster provides a usable travel window between 415 and 425 mm, allowing you to dial back the nominal 425 mm stroke by up to 10 mm during machine setup.
This extruded aluminum barrel design incorporates sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. It features a robust 40 mm carbon steel rod with an M36x2 thread, providing excellent rigidity, and uses PT tapered port threads for secure pneumatic connections. The rear stopper mechanism allows precise end-position tuning at commissioning without swapping out the entire cylinder.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X425-10 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X425-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X425-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X425-10 Is Used
Heavy Press Tuning
Fine-tune the exact bottoming position of a 425 mm stroke press without mechanical disassembly, using the 10 mm rear adjuster to set precise end-stops for varying material thicknesses.
Line Changeover
Rapidly adapt end-of-stroke positions during product size transitions on a heavy-duty conveyor, utilizing the adjustable travel window to accommodate new package dimensions instantly.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X425-10 the Right Cylinder?
The adjustable stroke is ideal for product changeovers where exact end-stops must be fine-tuned on the fly, avoiding the need to bolt on external stops or replace a fixed-stroke SAI cylinder. To match this ISO 15552 replacement, specify the 200 mm bore, 425 mm stroke, 10 mm adjustment, PT G3/4 port, and your required mounting from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Because the 425 mm stroke is long and unsupported, an external guide is recommended to prevent excessive side-loading on the rod. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider an external rod lock, a pilot-operated check valve, or the SAIL and BSAI cylinder series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X425-10 FAQ
At the maximum operating pressure of 1.0 MPa, it can deliver up to 3204 kgf.
The rear adjuster acts as an external stopper that allows you to shorten the effective stroke by up to 10 mm. This creates a usable travel window of 415 to 425 mm, enabling fine-tuning of the end position at commissioning without changing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X425-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.