Airtac SAIJ200 Adjustable Cylinder SAIJ200X475-30
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X475-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 475mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke475 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X475-30
The AirTAC SAIJ200X475-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 445-475mm usable travel window by dialing the stroke back up to 30mm from its 475mm nominal length. Built with a robust 40mm carbon steel rod and a G3/4 PT tapered port, it delivers massive thrust up to 28274N at 0.9 MPa.
This adjustable-stroke design allows fine end-position tuning at commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for future CMSE or DMSE sensor integration. Remember that the rear adjuster acts strictly as a travel stop and deceleration point, meaning it will not hold the load without live air pressure.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X475-30 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X475-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X475-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X475-30 Is Used
Heavy Press Fine-Tuning
Dial in the exact 445-475mm end position during heavy press commissioning without machining new external stoppers.
Product Size Changeover
Quickly adapt a heavy-duty production line to accommodate varying product lengths by adjusting the rear stopper.
Variable End-Stop Setup
Set precise retraction limits on large automated machinery using the 30mm adjustment range instead of a fixed stroke.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X475-30 the Right Cylinder?
If you need slightly less thrust, stepping down to a 160mm bore yields 14074N at 0.7 MPa. The adjustable travel is highly advantageous for machine setup and product changeover, providing a 445-475mm window without external stops. For load-holding without live pressure, select a SAIL or BSAI cylinder instead, as this SAIJ adjuster is a stop, not a lock. Because the 475mm stroke is long and unsupported, an external guide is required to manage side loads. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X475-30 FAQ
The rear adjuster allows you to shorten the effective stroke by up to 30mm, creating a usable travel window between 445mm and 475mm. This permits fine end-position tuning without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X475-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.