Airtac SAIJ200 Adjustable Cylinder SAIJ200X550-30S
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X550-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 550mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke550 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X550-30S
The AirTAC SAIJ200X550-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. A carbon steel rod and PT tapered port threads come standard on this large-bore unit.
Because the 550mm stroke is substantial, the 40mm rod diameter and M36x2 thread provide a robust interface, though an external guide is still recommended to manage side loads on long extensions. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic switches for precise end-position detection.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X550-30S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X550-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X550-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X550-30S Is Used
Product Changeover
Perfect for automated lines handling varying product sizes, allowing operators to quickly dial back the stroke from 550mm to 520mm without adding external mechanical stops.
Large Material Handling
Suitable for heavy-duty material alignment stations where the 40mm carbon steel rod manages substantial side loads while positioning large workpieces.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X550-30S the Right Cylinder?
The adjustable 520-550mm travel window is highly valuable for machine setups requiring variable end-stops during product changeovers, eliminating the need to physically swap out a fixed-stroke SAI cylinder.
When configuring your ISO 15552 replacement, note the PT port thread, carbon steel rod, and -S magnet for CMSE/DMSE sensors. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true fail-safe load holding, consider the SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X550-30S FAQ
It can deliver a maximum of 3204 kgf at 1.0 MPa.
The rear adjuster screw allows you to shorten the effective travel from the nominal 550mm down to 520mm. This stopper fine-tunes the retract end-position but does not lock the load; live air pressure is still required to hold position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X550-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.