Airtac SAIJ200 Adjustable Cylinder SAIJ200X60-10S
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X60-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 60mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke60 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X60-10S
The AirTAC SAIJ200X60-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering massive thrust up to 15708N at 0.5 MPa. It features a carbon steel rod and a PT tapered port. By turning the external rear stopper, you can fine-tune the effective travel within a precise 50-60mm usable window, trimming the nominal 60mm stroke by up to 10mm without adding external stops.
This adjustable mechanism is strictly a travel stop, not a lock, meaning it will not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet (-S) supports AirTAC CMSE reed and DMSE electronic sensors for exact position feedback.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X60-10S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X60-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X60-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X60-10S Is Used
Heavy Press Tuning
Dial in the exact 50-60mm travel window during heavy press commissioning to set precise end stops without swapping cylinders.
Product Changeover
Adjust the rear stopper on the fly to accommodate slight variations in product sizes on a high-force assembly line.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X60-10S the Right Cylinder?
Choose this 200mm bore when you need extreme force that smaller neighbors cannot provide, such as stepping up from a 160mm bore that yields 10053N at 0.5 MPa. The 10mm adjustment window is ideal for fine-tuning end positions during commissioning or product changeover, offering flexibility that a fixed-stroke SAI cannot match. Mounting options include the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, and TCM2. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X60-10S FAQ
It can deliver up to 3204 kgf at 1.0 MPa.
The rear adjuster acts as a mechanical stop that shortens the nominal 60mm stroke, giving you a usable 50-60mm travel window for fine-tuning. It is a stop, not a lock, so it will not hold the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.