Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-10S
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X600-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke600 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-10S
The AirTAC SAIJ200X600-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -10 mm adjustment mechanism allows you to fine-tune the usable travel window down to a precise 590-600 mm range without adding external stops. This cylinder includes a standard magnet for position sensing and uses PT tapered ports.
Because the 600 mm stroke is substantial for a 200 mm bore, the robust 40 mm carbon steel rod and M36x2 thread provide excellent rigidity, though an external guide is still recommended for heavy loads. The rear adjuster acts purely as a mechanical stop to set the end position and does not hold the load without live air pressure. For true load-holding requirements, consider the SAIL or BSAI series instead.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-10S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-10S Is Used
Heavy Press Tuning
Fine-tune the exact bottom-out position of a massive 15708N press operation within a 10 mm window, ensuring perfect material deformation without reworking machine frames.
Product Changeover
Quickly adjust the 600 mm travel end-stop by up to 10 mm during assembly line changeovers to accommodate slightly different large product dimensions.
Large Assembly Positioning
Move heavy industrial components into exact alignment using the 40 mm carbon steel rod, relying on the rear stopper to set the 590-600 mm travel limit accurately.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-10S the Right Cylinder?
Selecting this 200 mm bore adjustable-stroke model is ideal when you need extreme force combined with precise end-position tuning during commissioning or product changeover.
The -10 mm adjustment range allows you to dial back the stroke by up to 10 mm, providing a 590-600 mm usable travel window. This prevents the need to physically swap out a fixed-stroke SAI cylinder when minor dimensional variances occur. It is dimensionally interchangeable per ISO 15552 standards and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. The included -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-10S FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 3204 kgf.
The rear adjuster acts as a mechanical stop that lets you trim the effective travel back by up to 10 mm, creating a precise 590-600 mm usable window. It only sets the end position and does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.