Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-40
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X600-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke600 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-40
The AirTAC SAIJ200X600-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits fine-tuning of the retract end-position. It provides a usable travel window of 560 to 600 mm, allowing you to dial back the stroke by up to 40 mm during commissioning without adding external stops. As a profile cylinder, its extruded aluminum barrel includes sensor grooves on both sides for straightforward switch mounting.
It uses a G3/4 port and a robust 40 mm carbon steel rod with an M36x2 thread. The rear adjuster acts purely as a mechanical stop to set the travel end; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-40 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-40 Is Used
Heavy Press Tuning
Dial in the exact 560-600 mm end-position for large metal forming or pressing tasks where a 40 mm trim absorbs structural tolerances.
Automated Assembly Changeover
Adjust the retract stop on the fly during product size changeovers on heavy assembly lines without dismounting the cylinder.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-40 the Right Cylinder?
Select this 200 mm bore model when an application requires extreme force alongside precise end-stop calibration, such as heavy press or forming operations. Choose this adjustable SAIJ variant over a fixed-stroke SAI cylinder when you need variable end-stops to accommodate product changeovers or to fine-tune machine setup without physically swapping the actuator.
When replacing an ISO 15552 cylinder, match the 200 mm bore, 600 mm stroke, 40 mm adjustment range, PT tapered port thread, and the required mounting bracket from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because this unit lacks a -S magnet, it cannot host CMSE or DMSE sensors. Given the 600 mm stroke, the 40 mm rod handles significant side loads, but an external guide rail is strongly recommended to prevent rod bending over this long travel distance.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-40 FAQ
At 0.9 MPa, the push force increases to 28274 N.
The rear adjuster acts as a mechanical stop that lets you shorten the 600 mm nominal stroke by up to 40 mm, creating a usable travel window of 560 to 600 mm. It only sets the travel end and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.