Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-75
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X600-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke600 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-75
The AirTAC SAIJ200X600-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 525-600 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This model uses a robust 40 mm carbon steel rod with an M36x2 thread, providing high rigidity, though a 600 mm stroke still requires an external guide to manage side loads. It omits FB, CA, CB, and CR mounts, offering Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces. The rear stopper sets travel ends without external stops, but it is not a lock; for load-holding without live air, consider SAIL or BSAI.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-75 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-75 Is Used
Heavy Press Fine-Tuning
Dial in the exact 525-600 mm travel end-stop during machine commissioning to accommodate varying heavy-press material thicknesses without adding external stops.
Product Changeover Adjustment
Quickly adjust the retract position on a packaging line when switching to different box sizes, using the 75 mm rear screw to modify the stroke window on the fly.
Large Assembly Positioning
Position large automotive components accurately by tuning the end-of-stroke point, relying on the 40 mm rod for structural rigidity during the assembly process.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-75 the Right Cylinder?
The 75 mm adjustment range is ideal for product changeovers, letting you dial in the exact 525-600 mm travel without swapping cylinders. When matching ISO 15552 replacements, confirm the 600 mm stroke, 75 mm adjuster, PT G3/4 port, and standard carbon steel rod. Because the stroke is 600 mm, an external guide is necessary to prevent excessive side-load wear on the seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-75 FAQ
The rear adjuster acts as a mechanical stop that lets you trim the effective travel back from the 600 mm nominal stroke, creating a 525-600 mm usable window. It only sets the travel end and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X600-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.