Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-10S
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X65-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 65mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke65 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-10S
The AirTAC SAIJ200X65-10-S is a double-acting, double-rod ISO 15552 profile cylinder with a rear stroke adjuster. It features a 200mm bore and a 65mm nominal stroke that can be fine-tuned down by up to 10mm, providing a usable 55-65mm travel window.
This variant includes a carbon steel rod, PT tapered ports, and a magnet (-S) for position sensing. The extruded aluminum barrel integrates sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE solid-state switches. It uses the standard SAIJ mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR options.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-10S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-10S Is Used
Heavy Press Tuning
Dial in the 55-65mm travel window during heavy press commissioning to set exact end positions without adding external mechanical stops.
Product Changeover
Quickly adjust the rear stopper for different product sizes on a packaging line, using the 10mm trim range to adapt the stroke on the fly.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-10S the Right Cylinder?
The adjustable stroke is ideal for machine setup and product changeover, allowing you to dial in the 55-65mm end position without swapping cylinders or adding external stops. The rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, select an SAIL or BSAI cylinder.
For an ISO 15552 replacement, match the 200mm bore, 65mm stroke, 10mm adjustment, PT port, and -S magnet. The M36x2 rod thread and 40mm cushion provide robust impact absorption. Because the stroke is under 300mm, side-load risks are lower, but long unsupported loads should still use an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-10S FAQ
At the maximum operating pressure of 1.0MPa, it delivers up to 3204kgf.
The rear adjuster screw lets you shorten the 65mm nominal stroke by up to 10mm, creating a 55-65mm usable travel window. The adjuster acts as a mechanical stop for end-position tuning and is not a lock, so the cylinder cannot hold a load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.