Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-20
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X65-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 65mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke65 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-20
The AirTAC SAIJ200X65-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, designed for heavy-duty pneumatic applications. It features a robust 40 mm carbon steel rod and PT tapered ports. By integrating an external adjusting screw at the rear, this model allows you to fine-tune the effective travel to a precise 45-65 mm window during commissioning without swapping out the entire unit.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. While the rear stopper lets you dial in the exact end position, remember it acts strictly as a travel stop and does not hold the load without live air pressure.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-20 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-20 Is Used
Heavy Press Tuning
Dial in the exact 45-65 mm travel window during heavy press commissioning to accommodate material thickness variations without adding external stoppers.
Product Changeovers
Quickly adjust the end-stop position on a conveyor diverting system when switching between different large pallet sizes on the production line.
Assembly Station Setup
Fine-tune the retraction point of heavy tooling during initial machine setup, ensuring precise alignment before locking down the sequence.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-20 the Right Cylinder?
Choose this 200 mm bore cylinder when your application requires extreme force, such as 15708 N at 0.5 MPa, combined with precise end-position tuning. If your setup demands less push force, stepping down to a 160 mm bore yields 10053 N at 0.5 MPa, which may better suit medium-heavy loads. The adjustable stroke is specifically beneficial for product-size changeovers on a line, allowing operators to set variable end stops on the fly rather than machining external stop blocks.
When integrating this cylinder, note that the rear adjuster and the variable air cushions manage deceleration but cannot hold a load without continuous air. For load-holding requirements without live pressure, consider an external rod lock or explore related AirTAC types like the SAIL or BSAI. This SAIJ model supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2. It operates at speeds of 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-20 FAQ
At the maximum pressure of 1.0 MPa, it can deliver up to 3204 kgf.
The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the 65 mm nominal stroke by up to 20 mm. This creates a usable travel window of 45-65 mm for fine-tuning the end position at commissioning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X65-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.