Airtac SAIJ200 Adjustable Cylinder SAIJ200X650-20
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X650-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 650mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke650 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X650-20
The AirTAC SAIJ200X650-20 is a double-acting ISO 15552 profile cylinder featuring an integrated rear stroke adjuster. It delivers massive thrust, pushing 28274N at 0.9 MPa, making it suitable for heavy-duty operations. By turning the external rear stopper, you can fine-tune the effective travel down to a 630-650 mm window without swapping out the unit.
This model features a robust 40 mm carbon steel rod and a G3/4 port. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. It utilizes a reduced mounting interface subset (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets found on some standard variants.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X650-20 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X650-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X650-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X650-20 Is Used
Heavy Press Fine-Tuning
Dial in the exact 630-650 mm travel window during heavy press commissioning to accommodate material thickness variations without adding external physical stops.
Product Changeover Adjustment
Quickly modify the retract end-position by up to 20 mm when switching a production line to handle different sized pallets or products.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X650-20 the Right Cylinder?
The adjustable stroke is ideal for machine setup and product changeovers, allowing you to set a precise variable end-stop at commissioning rather than relying on a fixed-stroke SAI cylinder.
Because the 650 mm stroke creates a long lever arm, an external guide is recommended to prevent excessive side-loading on the 40 mm rod. Remember that the rear adjuster acts only as a travel stop and the air cushions provide deceleration; neither will hold the load without live air pressure. For true load-holding, consider an external rod lock or the SAIL pneumatic-lock series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X650-20 FAQ
The external rear stopper allows you to shorten the nominal 650 mm stroke by up to 20 mm, providing an effective adjustable travel window of 630-650 mm for precise end-position tuning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X650-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.