Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100S
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X700-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 700mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke700 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100S
The AirTAC SAIJ200X700-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering massive thrust up to 15708N at 0.5 MPa. By turning the built-in stopper screw, you can dial back the 700 mm nominal travel, creating a precise 600-700 mm usable window. This eliminates the need to swap hardware when finalizing end positions during heavy machinery commissioning.
Built with a carbon steel rod and PT tapered port threads, this unit includes a -S magnet for seamless tracking via CMSE reed and DMSE electronic sensors. The extruded aluminum barrel features dual sensor grooves, and the rear adjuster functions purely as a travel stop to fine-tune deceleration, not as a load-holding lock.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100S Is Used
Heavy Press Tuning
Dial in the exact 600-700 mm closure distance on large presses during setup, ensuring perfect contact force without machining custom spacers.
Pallet Changeover
Adapt automated heavy-pallet stops to different package lengths on the fly by adjusting the rear stopper, avoiding full cylinder replacement.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100S the Right Cylinder?
Choose this 200 mm bore when 160 mm falls short (offering 10053N at 0.5 MPa) and you need extreme force. The 100 mm adjustment range is perfect for production lines running mixed product sizes, allowing rapid end-stop changes without replacing the cylinder. For exact ISO 15552 replacement, match the 200 mm bore, 700 mm stroke, 100 mm adjuster, PT G3/4 port, and -S magnet.
Because the stroke is 700 mm, the heavy load demands an external guide to prevent rod side-loading. Remember that the rear adjuster only sets the travel end; it will not hold the load without live air. For true fail-safe load holding, select an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100S FAQ
It can reach a maximum of 3204 kgf at 1.0 MPa.
The rear stopper screw lets you shorten the 700 mm nominal stroke by up to 100 mm, providing a usable travel window between 600 and 700 mm. This stopper sets the end position but does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X700-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.