Airtac SAIJ200 Adjustable Cylinder SAIJ200X75-40
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X75-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 75mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke75 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X75-40
The AirTAC SAIJ200X75-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 35 to 75 mm, enabling precise end-position tuning at commissioning without adding external stops.
This actuator features a robust 40 mm carbon steel piston rod with an M36x2 thread, designed to handle high side loads, though a 75 mm stroke still necessitates external guiding for optimal machinery longevity. It uses a PT tapered G3/4 port and includes variable air cushions at both ends to decelerate heavy moving masses. The mounting footprint supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X75-40 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X75-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X75-40
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X75-40 Is Used
Heavy Press Tuning
Dial in the exact 35 to 75 mm travel window during heavy press setup to accommodate varying material thicknesses without changing the cylinder.
Product Size Changeover
Adjust the retract end-stop on the fly during product size changeovers on a conveyor line, saving downtime by avoiding physical cylinder swaps.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X75-40 the Right Cylinder?
The 40 mm rear adjustment screw is ideal for product-size changeovers on a line, allowing you to dial back the stroke from 75 mm down to 35 mm. If you need less force, stepping down to a 160 mm bore yields 10053 N at 0.5 MPa, whereas fixed-stroke needs without commissioning fine-tune are better served by the standard SAI series.
Because the rear adjuster acts only as a travel stop and the air cushions manage deceleration, neither will hold a load without live air. For load-holding without continuous pneumatic pressure, you must integrate an external pilot-operated check valve or switch to a SAIL (air-released lock) or BSAI (clamp-lock) cylinder. When matching ISO 15552 interchangeability, specify the 200 mm bore, 75 mm stroke, 40 mm adjustment, PT G3/4 port, and the required mounting bracket.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X75-40 FAQ
The operating speed range is 30-500 mm/s.
The rear adjuster allows you to shorten the effective travel from the nominal 75 mm down to 35 mm, creating a 35-75 mm adjustable window. It acts as a mechanical stop to fine-tune the end position and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X75-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.