Airtac SAIJ200 Adjustable Cylinder SAIJ200X750-50
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X750-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 750mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke750 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X750-50
The AirTAC SAIJ200X750-50 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering massive thrust for heavy-duty automation. The integrated rear stopper allows you to trim the effective travel, creating a 700-750mm usable window to perfectly dial in the retract position without adding external stops.
This 200mm bore unit features a robust 40mm carbon steel rod with an M36x2 thread, providing excellent rigidity for high side-load resilience. It uses PT tapered port threads (G3/4) and operates at speeds of 30-500mm/s. For position sensing, you can specify the -S magnet option to integrate AirTAC CMSE reed or DMSE electronic solid-state switches into the dual sensor grooves.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X750-50 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X750-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X750-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X750-50 Is Used
Heavy Press Tuning
Fine-tune the 700-750mm end position during heavy press setup, ensuring precise contact without repositioning the entire machine frame.
Large Mold Changeover
Adapt to different large mold sizes on an assembly line by dialing the rear stopper, achieving exact stroke limits quickly without external mechanical stops.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X750-50 the Right Cylinder?
The adjustable stroke is ideal for heavy machinery commissioning or product changeovers, allowing you to fine-tune the 700-750mm travel window on the fly instead of physically swapping cylinders. Ensure your ISO 15552 replacement matches these exact parameters: 200mm bore, 750mm stroke, 50mm adjustment, PT G3/4 port, and no magnet.
Because the stroke is 750mm, the extended rod is highly susceptible to deflection; an external guide mechanism is mandatory to prevent premature seal wear. Remember that the rear adjuster acts only as a travel stop and the air cushions only manage deceleration—neither will hold the load without live air pressure. For fail-safe load holding, consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X750-50 FAQ
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the nominal 750mm stroke by up to 50mm. This creates a usable travel window of 700-750mm, enabling precise end-position tuning without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X750-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.