Airtac SAIJ200 Adjustable Cylinder SAIJ200X850-10S
The AirTAC SAIJ200 Adjustable Cylinder SAIJ200X850-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 850mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke850 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X850-10S
The AirTAC SAIJ200X850-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. A carbon steel rod and PT tapered port come standard on this heavy-duty unit.
Because the nominal 850mm stroke is substantial, the robust 40mm rod diameter handles significant side loads, though an external guide is still recommended for unsupported lengths. The integrated -S magnet enables position detection with AirTAC CMSE reed or DMSE electronic sensors. This extruded aluminum profile cylinder supports a 30-500mm/s speed range and includes adjustable air cushions at both ends to decelerate large masses smoothly.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X850-10S Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X850-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X850-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X850-10S Is Used
Heavy Press Tuning
Dial in the exact 840-850mm end-stop during heavy press commissioning to accommodate material thickness variations without swapping cylinders.
Large Assembly Jigs
Fine-tune the retraction point on large-scale assembly jigs where a 10mm adjustment resolves minor mechanical misalignments safely.
Product Changeover
Adapt automated conveyor diverter arms to new pallet sizes by adjusting the rear stopper screw, avoiding lengthy mechanical rebuilds.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X850-10S the Right Cylinder?
Conversely, if you need less thrust, a 125mm bore provides 6136N.
The 10mm rear adjuster acts purely as a mechanical stop to fine-tune the retraction point; it does not lock the load or hold position without live air pressure. For load-holding requirements on this 850mm stroke, consider an AirTAC SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external pilot-operated check valve. To match this cylinder exactly for an ISO 15552 replacement, specify the 200mm bore, 850mm stroke, 10mm adjustment, G3/4 port, PT thread, and -S magnet. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X850-10S FAQ
At its maximum rated pressure of 1.0 MPa, it can deliver up to 3204kgf.
The rear adjuster screw allows you to shorten the 850mm nominal stroke by up to 10mm, creating an effective 840-850mm travel window. This mechanical stop fine-tunes the end position but does not hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X850-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.