Airtac SAIJ200 Adjustable Cylinder SAIJ200X900-100
The AirTAC Airtac SAIJ200 Adjustable Cylinder SAIJ200X900-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 900mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke900 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ200 Adjustable Cylinder SAIJ200X900-100
The AirTAC SAIJ200X900-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates an 800-900 mm usable travel window. Delivering 15708 N of push force at 0.5 MPa, this massive 200 mm bore actuator handles heavy-duty positioning tasks. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
Equipped with a 40 mm carbon steel rod and M36x2 thread, it provides high structural rigidity, though a 900 mm stroke demands an external guide to prevent excessive side-loading. The rear adjuster functions strictly as a travel stop for commissioning fine-tuning, not a lock, meaning live air pressure is required to hold the load.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X900-100 Technical Specifications
| Model | Airtac SAIJ200 Adjustable Cylinder SAIJ200X900-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ200 Adjustable Cylinder SAIJ200X900-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ200 Adjustable Cylinder SAIJ200X900-100 Is Used
Heavy Press Positioning
Fine-tune the 800-900 mm travel window during machine setup to precisely set the contact point for large industrial pressing operations.
Pallet Changeover Stops
Adjust the end stop on the fly to accommodate different pallet lengths on a heavy-material handling line without swapping actuators.
Large Assembly Jigs
Dial in the retract position during commissioning of large-scale assembly jigs where a 40 mm rod handles high structural loads.
Is the Airtac SAIJ200 Adjustable Cylinder SAIJ200X900-100 the Right Cylinder?
Choose this 200 mm bore when 15708 N of thrust at 0.5 MPa is required, stepping down to a 160 mm bore (10053 N) only if payload requirements decrease. The 100 mm adjustment window is ideal for product changeovers on large machinery, allowing you to dial in the exact end-of-stroke position without adding physical spacers. For operations needing true load-holding without sustained air pressure, an external pilot-operated check valve or the AirTAC SAIL lock series is required.
As a dimensionally interchangeable ISO 15552 cylinder, it replaces equivalent profile cylinders using the exact bore, 900 mm stroke, 100 mm adjustment, G3/4 PT port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because no magnet is specified, position sensing via CMSE reed or DMSE electronic switches is not supported without adding the -S option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ200 Adjustable Cylinder SAIJ200X900-100 FAQ
At 0.5 MPa operating pressure, this 200 mm bore cylinder provides 15708 N of push force and 15080 N of pull force. It can reach up to 3204 kgf at its maximum 1.0 MPa pressure rating.
The rear adjuster acts as a mechanical stop that trims the nominal 900 mm stroke back by up to 100 mm, providing an 800-900 mm usable travel window. It allows precise end-position tuning during commissioning but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ200 Adjustable Cylinder SAIJ200X900-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.