verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40AX10-10

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX10-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 10mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke10 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$78.59 $86.09Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX10-10

The AirTAC SAIJ40X10-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 0-10mm usable travel window, allowing you to fine-tune the end position at commissioning without swapping the cylinder or adding external stops.

This adjustable-stroke model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR options. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.

Airtac SAIJ40 Adjustable Cylinder SAIJ40AX10-10 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40AX10-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke10 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40AX10-10

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×10Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX10-10 Is Used

tune

End-Position Tuning

Dial in the exact 0-10mm travel window during machine commissioning to perfect the final clamping or pressing position.

settings_input_component

Product Changeover

Quickly adjust the retract stop on the fly when switching between product sizes on a conveyor line without changing hardware.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX10-10 the Right Cylinder?

The 10mm adjustment range is ideal for product changeovers on a line, letting you dial back the stroke to exactly 0mm if needed. If your application requires less force, stepping down to a 32mm bore yields 563N at 0.7 MPa.

Because this is a profile cylinder with PT tapered ports, it is dimensionally interchangeable per ISO 15552. Remember that the rear adjuster and air cushions only set the travel end; neither functions as a lock or brake. If you need to hold a load without live air, use an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40AX10-10 FAQ

The rear adjuster screw lets you shorten the effective travel by up to 10mm, creating a 0-10mm usable window from the 10mm nominal stroke. This allows fine-tuning of the end position without external stops, though it acts as a stop and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40AX10-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40AX10-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.