
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX100-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X100-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 90-100mm adjustable travel window, allowing you to trim the effective stroke by up to 10mm during commissioning without swapping the cylinder or adding external stops.
This variant is equipped with a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance and features PT tapered port threads (G1/4). The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily mount CMSE or DMSE electronic sensors if position feedback is needed later.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX100-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 90-100mm travel window during product size changes to perfectly position stops without machining new brackets.
Fine-tune the end-of-stroke position during commissioning to achieve exact clamping or pressing depths on the fly.
Adjust the retract position dynamically for sorting or diverting tasks where the physical stop location must shift slightly.
Choose this 40mm bore cylinder when an application requires exact end-position tuning that a fixed-stroke SAI cannot provide. The 16mm rod and M12x1.25 thread offer good side-load capacity, but for this 100mm stroke, ensure your load is guided to prevent binding.
The rear adjuster acts purely as a mechanical stop to set the travel end and relies on the variable air cushion for deceleration; it does not hold the load without live air. For load-holding requirements without continuous pressure, consider the SAIL or BSAI series. This model is dimensionally interchangeable with ISO 15552 cylinders, utilizing a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR).
Quick checklist
The rear adjusting screw allows you to shorten the nominal 100mm stroke by up to 10mm, providing a usable travel window of 90-100mm. It acts as a mechanical stop and does not lock the position without continuous air pressure.
At the maximum 1.0MPa pressure, the push force increases to 1130N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.