
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX100-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X100-100 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering 628N of pull force at 0.5 MPa. Because this specific SKU carries a 100mm adjustment code on a 100mm nominal stroke, it yields a highly flexible 0-100mm usable travel window. This allows you to set the exact retraction end-point during commissioning without swapping out the physical cylinder.
This configuration features a SUS420J2 stainless steel rod (material code A) for improved corrosion resistance and utilizes PT tapered port threads with a G1/4 connection. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is added later. The rear adjuster acts purely as a travel stop to fine-tune deceleration, not as a lock to hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX100-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction stop between 0 and 100mm when switching a packaging line to a different carton size, avoiding the need for external stopper blocks.
Fine-tune the end-of-stroke position during initial machine setup to perfectly time the 628N pull force against a mechanical datum.
Use the wide 100mm adjustment range to alter the effective stroke on automated assembly equipment without disassembling the cylinder mount.
Choose this 40mm bore cylinder when an application requires precise end-position tuning on the fly, such as accommodating multiple product sizes on a single machine line. If you need less fine-tune travel, a SAIJ40X100-20 offers a tighter 80-100mm window, whereas this 100mm adjuster provides maximum flexibility. If your setup demands higher force, stepping up to the 50mm bore yields 825N of pull force at 0.5 MPa. For fixed-position tasks without variation, the standard SAI cylinder is a simpler alternative.
When replacing an ISO 15552 cylinder, match the 40mm bore, 100mm stroke, PT port threads, and mounting choice. SAIJ supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Remember that the rear adjuster and air cushions only set the travel end; for true load-holding without live air, select a SAIL pneumatic lock or BSAI clamp-lock cylinder.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 100mm. Since the nominal stroke is 100mm, this gives you a usable travel window of 0-100mm to set the exact retraction end-point without changing the cylinder.
It operates at speeds between 30 and 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.