
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX100-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X100-100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The -100 adjustment code provides a massive 0-100mm usable travel window, allowing you to dial back the 100mm nominal stroke entirely if needed for precise end-position tuning.
This specific SKU includes a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and ships with a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic solid-state sensors. The extruded aluminum barrel incorporates sensor grooves on both sides, while the mounting set is reduced to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX100-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position from 0 to 100mm during machine commissioning to perfect product placement without adding external mechanical stops.
Quickly adapt the stroke length on automated lines handling varying package dimensions, using the rear screw to set new end positions on the fly.
Achieve precise clamping or positioning force by adjusting the travel window to match part tolerances, preventing over-travel and damage.
An adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers without swapping out the physical cylinder. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series. Because the nominal stroke is 100mm, side-load is minimal, but always guide long unsupported loads externally.
Quick checklist
The 100mm nominal stroke can be adjusted backward by up to 100mm, providing a usable travel window of 0 to 100mm for maximum setup flexibility.
At 0.9 MPa, the push force increases to 1130N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.